Niobium Wire
Niobium Wire
Brief introduction:
Niobium is a gray metal and its melting point is 2468 ℃, boiling point is 4742 ℃ , density is 8.57 g / cm3. Pure niobium is used in electron tube to remove the residual gas. Niobium is also used to manufacture high temperature ceramic metal. The physical and chemical properties of tantalum and niobium are very similar. Niobium itself is very strong and the

niobium carbide

is more hard.

Material:    RO4200-1, RO4210-2A
Size:           ¢0.25~¢3mm
Standard:  As per ASTM B392-98
Purity:        ≧99.9% or 99.95%(Nb+Ta)

Properties of niobium wire:
Niobium has such properties: high melting point, good corrosion resistance, compression resistance, abrasion resistance, etc.

Niobium wire

has the similar properties as those of niobium.

Applications of niobium wire:
Due to niobium’s high melting point, corrosion resistance, cold processing and good performance characteristics, niobium wire is widely used in chemical, electronic, aviation and aerospace fields.
 
Table.1 Chemical composition: 
chemistry%
designation chief component impurities maximum
Nb Fe Si Ni W Mo Ti Ta O C H N
Nb1 Remainder 0.004 0.003 0.002 0.004 0.004 0.002 0.07 0.01 0.004 0.0012 0.002
Nb2 Remainder 0.005 0.005 0.005 0.01 0.01 0.004 0.1 0.015 0.01 0.0015 0.01
 
Table 2. Mechanical requirements (annealed condition)

Grade Tensile strength  δbpsi (MPa), ≥   Yield strength  δ0.2, psi (MPa),≥ Elongation in 1"/2" gage length, %, ≥
RO4200-1
RO4210-2
 18000 (125) 10500 (73)  25 
 
Special requirements to be agreed on by the supplier and buyer of negotiations
 
Inquiry
We are SALER, as well as PRODUCER. We have more than 25 years of experience in metal manufacturing technology and can provide personal service. You can contact us by sending e-mails to inquire about products. We will reply as soon as possible.
ISO Authentication
IQNet Authentication
Alibaba Gold Supplier
Contact Us for More...
We Can Provide 24-hour Service to You.
86-371-66311492
86-379-65086068