GR5 titanium alloy plate
Product Name: GR5 titanium plate
Specifications: TA1/TA2/TA9/TA10/TC4
Product categories: titanium and titanium alloy materials
1. Reference standard
A. GB 228, metal tensile test method
B. GB/T 3620.1, Grade and chemical composition of GB/T 3620.1 titanium and titanium alloy
C. GB/T3620.2, Deviation of chemical composition and composition of titanium and titanium alloy processing products is allowed.
D. GB 4698 sponge titanium, Methods for chemical analysis of titanium and iron alloys.
2. Technical requirement
A. The chemical composition of titanium and titanium alloy sheet and plate shall comply with the provisions of GB / T 3620.1, if it need to reinspect, the allowed deviation of the chemical composition shall be in accordance with the provisions of GB / T 3620.2.
B. The allowable deviation of the thickness of the plate shall be in accordance with the regulations.
C. The allowable deviation of width and length of the plate shall be in accordance with the regulations.
D. The angle of the plate should be cut into right angles. When it is cut, it should not exceed the allowable deviation of the length and width of the plate.
Specifications: TA1/TA2/TA9/TA10/TC4
Product categories: titanium and titanium alloy materials
1. Reference standard
A. GB 228, metal tensile test method
B. GB/T 3620.1, Grade and chemical composition of GB/T 3620.1 titanium and titanium alloy
C. GB/T3620.2, Deviation of chemical composition and composition of titanium and titanium alloy processing products is allowed.
D. GB 4698 sponge titanium, Methods for chemical analysis of titanium and iron alloys.
2. Technical requirement
A. The chemical composition of titanium and titanium alloy sheet and plate shall comply with the provisions of GB / T 3620.1, if it need to reinspect, the allowed deviation of the chemical composition shall be in accordance with the provisions of GB / T 3620.2.
B. The allowable deviation of the thickness of the plate shall be in accordance with the regulations.
C. The allowable deviation of width and length of the plate shall be in accordance with the regulations.
D. The angle of the plate should be cut into right angles. When it is cut, it should not exceed the allowable deviation of the length and width of the plate.
