Tungsten and Molybdenum Machining
Tungsten and molybdenum machining refers to manufacturers adopt powder metallurgy or vacuum smelting to make ingot and then use plastic processing technology to produce tungsten and molybdenum machining parts like plate, belt, foil, tube, rod, wire.
Because molybdenum has hard and brittle properties, so it is difficult to machine molybdenum. As for molybdenum plate processing, there are reel, twisting, bending, pressing and punching molybdenum plates.
Due to molybdenum material has big rigidity, strong combining power and not easy to be deformed, so when cutting molybdenum, manufacturers need sharpen the knife blade to be very smooth.
Because molybdenum is not easy to be deformed, so molybdenum need to be heated before processing. At the same time, molybdenum manufacturers need adjust the punch velocity. The punch velocity and the deformation velocity of molybdenum should keep the same speed.
In tungsten and molybdenum processing, rolling, forging, turning, drilling and grinding would produce metal dust. If the metal dust is absorbed in the human body, it will cause a lot of damages. So people engaging in tungsten and molybdenum machining need firstly protect themselves. On this premise, hard study knowledges about the production and processing of rare metal.
Over 24 years of manufacturing and exporting refractory metal have given us a profound understanding of what our clients need. And so we are committed to quality and excellent service.
We can provide standard and customized metal products. You will appreciate our products’ quality and attentive services. In order to fully monitor quality, we make and inspect every one of our refractory metal products at our factory. Contact us today for more information.
Because molybdenum has hard and brittle properties, so it is difficult to machine molybdenum. As for molybdenum plate processing, there are reel, twisting, bending, pressing and punching molybdenum plates.
Due to molybdenum material has big rigidity, strong combining power and not easy to be deformed, so when cutting molybdenum, manufacturers need sharpen the knife blade to be very smooth.
Because molybdenum is not easy to be deformed, so molybdenum need to be heated before processing. At the same time, molybdenum manufacturers need adjust the punch velocity. The punch velocity and the deformation velocity of molybdenum should keep the same speed.
In tungsten and molybdenum processing, rolling, forging, turning, drilling and grinding would produce metal dust. If the metal dust is absorbed in the human body, it will cause a lot of damages. So people engaging in tungsten and molybdenum machining need firstly protect themselves. On this premise, hard study knowledges about the production and processing of rare metal.
Over 24 years of manufacturing and exporting refractory metal have given us a profound understanding of what our clients need. And so we are committed to quality and excellent service.
We can provide standard and customized metal products. You will appreciate our products’ quality and attentive services. In order to fully monitor quality, we make and inspect every one of our refractory metal products at our factory. Contact us today for more information.
